Are B22 And B22d Interchangeable?

Are B22 And B22d Interchangeable?

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Are B22 And B22d Interchangeable?

There are many types of bulbs and light fittings on the market today.

Before you choose which type to buy for any project, or even before you look to purchase anything, be sure to check out our handy guide.

First, it will help you identify the difference between two types of standard bulbs: downlights and strip lights. Second, it will teach you about b22 and b22d bulbs.

But, Are B22 And B22d Interchangeable?

No. To use either bulb, you would have to buy a specialized converter. So if you’re switching from an incandescent light bulb, you will buy an LED light batter. The voltage output is different, and the light bulbs can handle various wattages to fit a specific need.

For example:

An incandescent bulb is 100 watts, but an LED bulb can be 7 watts or 18 watts, depending on its purpose.

Since there can be such a difference in wattage from one type of light bulb to another, it’s important to remember that they are not interchangeable.

An incandescent bulb is 60 watts. A B22 / B22d bulb is 7 or 18 watts.

You cannot use a 25 watt LED light bulb with a standard 15 watts LED light batter.

You can use most LED lights in four ways: as an accent light, for functional tasks, for decorative purposes, and overall general lighting.

Does The E27 Bulb Fit B22?

No. The E27 bulb is larger than the B22. That’s right if your light fixture only accepts E27 bulbs, then you can’t use them in a B22 lamp socket.

The good news here is that the reverse is true, so if you only have B22 sockets and require an E27 bulb, you’ll need to convert your light fixture.

Considering that this may not be feasible or cost-effective, I recommend using a smaller wattage bulb to get the desired effect without risking damaging your light fixture.

There is one exception: If you want to use a larger wattage bulb than the B22 bulb, and the fixture takes a larger wattage, you can use an E27.

This scenario would include fixtures that are purpose-built for E27 (such as outdoor lighting or outdoor Christmas lights) or if you have a lamp that accepts an E27 socket and you want to use a B22 bulb.

What Is The Distinction Between B22 And B22d?

There are several differences between B22 and b22d bulbs. They include:

Base: B22 bulbs have a medium-sized screw base, and b22d bulbs have a candelabra (tiny person) screw base

Voltage: B22 bulbs can operate up to 130 volts, and b22d bulbs operate only at 120 volts

Energy Efficiency: B22 bulbs are more energy-efficient than b22d bulbs because they conduct heat better than their counterparts,

Which allows the filament to be hotter, which means it doesn’t use as much electricity. Life: B22 bulbs and b22d bulbs have different life expectations.

The life of a b22 bulb is around 2500 hours, while the life expectancy of a b22d bulb is approximately 10,000 hours.

“The distinction between the two bulbs is in their heat emission to the air. With B22 bulbs, the filament is hotter than with a b22d bulb, so it emits more heat than with a b23 bulb.

A bigger difference is in the size of the bulbs.

With B22 bulbs, it’s standard to have a medium-sized screw base, while with a b22d bulb, it’s common to see candelabra-sized screw bases.

The electricity used between the two is also different; B22 bulbs use up to 130VDC while b22d bulbs use 120VDC. The bulbs also emit different colors (blue/red).

Is E27 The Same As SES?

No. E27 has a lower wattage than SES. E27 bulb is commonly used for smaller light fixtures in quite large rooms.

The SES bulb is typically used to help make the room more accessible because of its narrower shape.

E27 has a socket of the standard E26 type, while SES will have a pin-type electrical connector.

E27 has a larger diameter than SES. It’s best to check if it’s compatible with your lamp by checking the size of the bulb.

Some people want to buy E27 bulbs online because they’re cheaper and delivered anytime you want them.

However, if you’re going to buy SES bulbs(Amazon Link) online, it’s best to make sure there’s a way to track your package, as they can be more delicate.

E27 and SES are different in more than just their shapes and sizes. They both serve different purposes.

Because of the different purposes, there are also different bulbs for each. Check the size carefully, even if the description says “SES.”

Are E11 And E12 Bulbs Interchangeable?

No. The popular E11 and E12 light bulbs are not interchangeable. So if you have one that’s not working, it might be time to buy a new one.

If you’re confused about what bulbs these are, let me explain. E11 and E12 stand for energy-saving light bulbs.

These light bulbs use up to 85% less energy than traditional incandescent light bulbs and save around $30 in electricity over their lifetime compared with a standard incandescent bulb.

They also last between 6,000-10,000 hours versus 1-2 hours for traditional incandescent.

A standard E11 has a plastic base/socket, and an E12s has a metal base/socket. The bulbs differ in length, with the E12 being around 12mm longer than the E11.

Usually, this won’t be an issue unless you are using light pendant fittings or the bulb is near other fittings, but if you’re unsure, it’s best to buy from a reputable seller you trust.

Are E11 And T4 Bulbs The Same?

No. E-11 bulbs are usually designed for horizontal fixtures, while T4 bulbs are typically intended for vertical fixtures.

E-11 bulbs have a larger filament, spreading the light further and giving a softer glow. T4 bulbs have a smaller filament that produces more concentrated light with an intense glow.

It’s vital to note that these two types of lamps are not interchangeable – using E-11 bulbs in place of T4 or vice versa will significantly lower the lifespan of your bulb.

What Does JD E11 Mean?

JD E11 bulbs mean the power used by the light bulb is equal to 11 watts. Light bulbs are always measured in watts, so a light bulb can’t use over one watt.

The number is always written as “JD E11”, with “JD” standing for the company name, and “E” means that the amount of electricity it will use has been well designated as equivalent to 11 watts.

Most light bulbs have an identification number on them that tells you how much energy they need per hour (W), days (D), or annually (A).

The current (C) value is usually a rounded number, and the bulb may also have a power factor.

When you buy light bulbs, you can also get a chart that tells you the wattage of different bulbs.

For example, if you are shopping for replacement bulbs for your garage, you may consider buying a 75-Watt incandescent light bulb when your old ones use only 10 watts.

The higher the wattage, the brighter the light bulb. If a 60-watt lamp burns out and you replace it with a 75-watt lamp, you will have much more light in your garage.

Can I Use LED Bulbs In Ceiling Fans?

Yes. The following light bulbs will work in your ceiling fans: LED, CFL, incandescent, and halogen light bulbs. This post also lists incandescent, CFL, and LED bulbs tips.

Some people think you cannot use LED or CFL light bulbs in a ceiling fan because the current is usually supplied to the fan’s electrical system.

However, this is not true; contact your fan manufacturer to find out the wattage of your current circuit breaker. You will see the wattage on the back of the breaker.

Usually, this voltage is 120 volts, meaning that you can use a max of 100 watts or higher in your ceiling fan.

Why Won’t LED Lights Work On My Ceiling Fan?

LED lights don’t work in ceiling fans because they are usually designed to rotate, but the light isn’t.

The LED bulb needs air to cool the light because it doesn’t have a filament or gaslight source.

If you install an LED in a ceiling fan(Amazon Link) without proper ventilation for heat dissipation, it will fail quickly due to heat buildup caused by a lack of airflow in the heat sink.

It’ll probably even cause your fan blades to turn dark brown. If you are curious about what I am talking about, look at the back of an LED light bulb.

The only way to get LED bulbs to work in ceiling fans without heat sinks is by using an LED dimmer controlled by a relay.

And even then, they still drain the fan of electricity and cause problems like above.

Can You Install A Ceiling Fan With Only One Light Switch?

Yes. A ceiling fan needs only one light switch to work. You can install a ceiling fan with a single light switch in two different ways.

The first is the most straightforward: you would need a single-pole ceiling fan installation kit, including a wall plate, mounting screws, and wiring instructions for connecting the fan to your single-pole light switch.

The second way of installing the ceiling fan is more complex and involves installing dual controls into your home’s electrical panel.

You need a two-pole switch and an intermediate circuit, which is essentially a “daisy chain” of wiring that leads from the wall to the ceiling fan and then back to the electrical panel.

This method simplifies it to control the outlet from a single location.

Though more straightforward, this method is often more expensive because you must professionally install the wiring.

Many people choose to install both methods of installing a ceiling fan – single-pole and dual controls .

Because it’s possible to have one switch control multiple lighting devices, such as lights and ceiling fans, using the light switches in your home’s electrical panel.

Do Ceiling Fans Need A Special Switch?

Yes. Fan-motion switches operate differently than standard on/off switches, and you should install them with the help of an electrician or someone with knowledge or experience in the field.

To install one, you need to have a box with clear access to your ceiling fan blades, two wires (black and white), a switch handle, screwdriver, wire strippers, and replacement screws that come in most switch handles.

You will also need to identify which blade you will attach the switch to, usually the bottom blade. The switch does not replace the standard ceiling fan pull chain, but it’s wired.

If you have a straightforward two-button switch that is only turned on and off (or sometimes on), you can install it yourself with a bit of patience and work.

First, you’ll want to run a wire to the blade attached and cut off the excess in an inconspicuous area.

Then you’ll want to specify a switch location and choose which blades of your fan this switch will operate.

Sometimes, you may find that only one blade needs the switch’s operation, but this is not the case more often than not.

The instructions for the fan-motion switch for two-button switches vary with the manufacturer.

You can locate some in a wiring compartment, and others you will find integrated into a panel mounted on the ceiling about two inches away from the blades with the wires bent under it.

I had little success finding an instruction sheet on which motors each switch operated, but I successfully installed it after trial & error.

Does A Ceiling Fan Have To Be Hard-Wired?

Yes. This doesn’t mean that you can’t install a ceiling fan without the help of any wires.

Sometimes, you can use a “plug-in” ceiling fan (though this type of fan usually has a power cord attached, so the name is misleading).

A plug-in ceiling fan has many advantages.

For example: installing a plug-in ceiling fan saves you the time and energy it takes to install wires or hire an electrician.

It also allows you to install the fan wherever it needs to be, with no electrical outlet.

The best part about this is that your plug-in ceiling fan will always be ready to use, no matter where you live.

One can install it anywhere in their living room or bedroom, and it will provide you with extra cooling with or without electricity.

Aside from the time and energy saved, installing a plug-in ceiling fan has one other significant benefit: it’s completely safe.

The fan is on when you want it to be (with or without electricity) and off when you don’t. It won’t store up electricity, which can be dangerous.

If you don’t have a plug-in ceiling fan, you might wonder what the difference is between the two. An adapter installed on a standard electrical outlet powers the plug-in ceiling fans.

This adapter plugs into your regular electrical outlet and creates a much more complex wiring job than typical ceiling fan wiring.

Bottom Line

Now that you have the information regarding different bulb types, I hope you can make a better decision when buying a new ceiling fan for your home.

Remember, you also need to know the size and number of fans in each house room.


Hi! I I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts