Do Frigidaire Refrigerators Have Wheels?


Do Frigidaire Refrigerators Have Wheels?

Note: As an amazon associate I may earn a small commission from qualifying purchases if you click to amazon from my site and choose to make a purchase.You can read my complete affiliate disclosure for more details

Do Frigidaire Refrigerators Have Wheels?

Frigidaire refrigerators are a popular appliance choice in the United States today. This is because of their high quality, affordable pricing, and sleek design.

Unlike other refrigerators on the market, the Frigidaire refrigerator has a superior ice-making capability that helps make it so appealing to those who value such things.

This is the one for you if you’re looking for a new refrigerator in various colors.

Yes. Frigidaire refrigerators have wheels. The refrigerator has many different shapes and sizes with wheels.The more often you find your refrigerator slipping out of place or getting stuck, its because it no longer fits on the floor properly, it will be better to replace it with one with wheels.

The refrigerator with wheels is easy to move and can fit into tight corners and small spaces.

You will no longer worry about where you will store your food or how to get the food out of the refrigerator when you have a Frigidaire refrigerator with wheels.

You may have heard that Frigidaire no longer produces refrigerators with wheels.

This is partially true because they still produce some models with wheels, although they are not as many.

Also, you can find a model with wheels that some other manufacturers make besides Frigidaire.

I call them traditional refrigerators, and they are small and have a pull-out drawer on the left side beside the ice maker.

How Do You Raise The Wheels On A Frigidaire Refrigerator?

  • Remove the screws from the bottom of your refrigerator with a Phillips screwdriver.

Pull off the plastic trim at the edge of your appliance.

Then remove two side panels from up near the top of your fridge by popping out their plastic clips with a flathead screwdriver or something similar.

They should slide off easily if you give them a firm pull or push for about ten seconds and then release pressure on them to let go.

  • Unplug your appliance and let it sit for about ten minutes if there is any chance of a fire developing. Locate the screws behind the plastic trim underneath the fridge and remove them.
  • Remove the plastic trim beneath all four sides of your fridge and pull out the metal trim to raise it.
  • Locate the screw behind the plastic trim at the back left of your fridge, remove it and let it drop to the floor, then proceed to #7 below.
  • Remove the wheels by pulling them straight up and out of the wheel well after removing the covers by prying off their plastic clips with a screwdriver or something similar.

The wheel covers are easier to remove than you think, so don’t give up on this step.

  • Put back together in reverse order. Put the plastic trim back and finish. Now it’s ready to put your appliance back where it belongs.
  • Plug it back in, but the side panels are on, then snap the fridge sides back into place.

Re-screw the front hinge bracket screws back into place with a Phillips screwdriver and plastic screw cover that you left out at this point when you removed before.

Can You Adjust The Wheels On A Refrigerator?

Adjusting your refrigerator’s wheels is easy.

Adjusting the Right Wheel

Step 1: Turn off all electrical power in the refrigerator and turn off the hose.

Move your refrigerator out of the way and place your large flat surface table or desk against it as support.

Take your large flathead screwdriver between the roller pin and the shaft. This will keep the wheel from rolling or spinning when turning the shaft.

Step 2: Using your two-toned hammer, place it on top of the large flathead screwdriver, but instead of using your hammer to pound on the screwdriver;

Use it to tap on the end of a shaft below where you placed the flathead screwdriver. Tap the shaft in a clockwise direction until it begins to move.

Put as much force on the shaft as possible, but try not to break it.

Step 3: Once the wheel is centered, grab your screwdriver with both hands and rotate that end of the shaft to point towards the roller pin.

Try not to turn it too far because if you do, you will be pushing on an area where there is nothing, meaning that your refrigerator will have less power, and its compressor will work harder.

Step 4: Grab the wheel with both hands and rotate the screwdriver to point toward the wheel.

Rotate the shaft in a counterclockwise direction to disengage the roller pin from your wheel, then pull on your wheel to roll off your support surface and into its final position.

If there is resistance, you may need to tap or pound on the shaft a little harder or as much as necessary.

Step 5: Remove your flathead screwdriver and hammer once the wheel is correct.

Then move your refrigerator back into its previous position to see if you need to adjust your other wheels.

Adjusting the Left Wheel

Step 1: Repeat steps one through four but with the opposite wheel.

Step 2: Once you have gotten this wheel centred, grab it with both hands and rotate that end of the shaft to point towards the roller pin. Rotate the shaft in a clockwise direction until it engages.

Step 3: Once you have gotten the wheel engaged, grab your screwdriver with both hands and rotate that end of the shaft to point towards the wheel.

Turn the shaft in a counterclockwise direction to disengage the roller pin from your wheel, then pull on your wheel to roll off your support surface and into its final position.

Do Frigidaire Refrigerators Have Wheels?

If there is resistance, you may need to tap or pound on the shaft a little harder or as much as necessary.

Step 4: Remove your flathead screwdriver and hammer once the wheel is correct. Then move your refrigerator back into its previous position to see if you need to adjust your other wheels.

Step 5: If your adjustments have satisfied you and you want to ensure that your new wheels are true and straight, then take five steps, one with each wheel.

You will need a five-foot tape measure, a pair of three-inch count vernier calipers, and a small woodblock.

Step 6: Place the tape measure on your supporting surface with the little plastic tip about 12 inches below the handle.

Hold both calipers in one hand and place your block of wood perpendicular to the wheels on your table.

Using one foot, push down on your calipers to fix them at their maximum possible setting (make sure they do not move).

Now, push the woodblock down using your other foot so that the tape measure reads 1 inch.

Now remove your foot from the calipers and place them back on zero (or whatever setting is on them).

If your woodblock was in line with the wheels, you shouldn’t need to adjust anything else on your refrigerator. If not, then take five steps, one with each wheel again.

Do Fridge Wheels Lock?

No. Since the wheels or rollers do not lock in place, it may help place a piece of wood, a shelf, or a book on top of the wheels to keep them from moving.

If your fridge has bells (the noise they make when they turn), you can also place that on the rollers if you think it will help.

The metal piece in front of the lock is sometimes too wide for some fridges and doesn’t allow enough space between the wheels where they rest, so this may cause them to stop working or move relative to each other, eventually.

The metal piece is about 1½ to 2 inches wide by about an inch tall. It usually comprises somewhat flimsy material (although I am not sure what).

It may help slightly bend the metal piece outwards to make more space between the wheels. You may need it on both sides or just the side where the wheels are moving.

If your fridge has a light that shines onto the rollers and shows them spinning, you can also turn that light off for a day or two so that you can’t see if they are spinning.

If you have kids, I would also ensure that they do not open the door to the fridge when it is spinning because it could cause injury.

Do Kenmore Refrigerators Have Wheels?

Yes. All Kenmore refrigerators have wheels and a handy capacity guide on the side of the fridge. So, you can easily see which size to get.

Here are a few of the most popular models that have wheels:

The Kenmore 56546 24” under-counter refrigerator is great for small kitchens, dorms, or tight spaces.

It has two adjustable full-width wire shelves, an interior light, and a 1/2-casement window.

This refrigerator also has solid wood shelves and molded panels to give it a sleek look that you can use to complement your kitchen decor.

The Kenmore 54827 23.5” Compact Refrigerator has a capacity of 7.8 cubic feet.

It features a full-width slide-out freezer with a built-in handle, a padded shelf liner, a removable basket for easy cleaning, an interior light, and one front-loading smooth-opening drawer.

Its compact design means you can easily fit it into tight spaces.

The Kenmore 59701 15.8 Cu. Ft. French Door Refrigerator has a capacity of 15.8 Cu ft.,

Features a full-width freezer with a built-in handle, 4 full-width adjustable wire shelves, an interior light, and a 1/2″ casement window, and has been ENERGY STAR® certified for its energy efficiency.

What Can I Put Under My Fridge To Protect The Floor?

You can place a thick rug under your fridge to protect the floor.

The appliance’s weight will help it stay in place, and you can use a laundry basket or sturdy garbage can to collect any water that might leak from the bottom.

You can also put thin foam sheets down where you place your appliance, so it’s not directly on the flooring. A thick set of rugs is also an option if you have carpeted floors.

If you have hardwood floors, carefully lay down an area rug with a thick bedspread before putting the appliance in place to protect from damage from feet and feet size.

If you have a vinyl floor, put a plastic sheet underneath your appliance; you can also use plastic bags with cut off corners to cover the floor.

There are several other options if you do not want to cover your flooring. You can buy a wire shelf for the bottom of your appliance and attach it to the wall.

A heavy-duty bin liner for the refrigerator is also an option but will not be as effective at keeping the fridge in place as a towel or thick bedspread.

Just run your fingers under there a few times and if it’s dry, feel free to put a towel.

You could use a rubber band, wrap a heavy-duty plastic bag around the appliance or place the appliance on a shelf.

If you want to see what’s happening, you can get an inexpensive magnetic strip under your refrigerator. It will show you if something has spilled and can identify it.

You can also buy an inexpensive tool called an ice detection sensor that fits behind your refrigerator and monitors if the liquid is coming from under the door when your fridge door is open.

How Do You Level A Refrigerator On An Uneven Floor?

If you’re lucky, and your refrigerator is sitting on a flat floor. If it’s not, you’ll need to level it out so that one side isn’t lower than the other. So, here’s what you do.

– Place a couple of old boards or pieces of cardboard underneath the legs on the lowest side of your fridge.

– The bobbling or slant may not be such a bad thing. Some people have found that putting things in the fridge’s bottom causes the refrigerator to tilt towards that side.

If you don’t want this to happen, make sure you don’t put heavier items on one side.

– You could try putting blocks on the floor in front of the refrigerator to displace the air as it makes its way to the sides.

– If your fridge has slanted, you might replace it with a new one (though they are getting better and cheaper these days).

– If you can’t get it level, you can always put two or three boxes on either side of it. You could use shims, but you have to make sure they’re only as thick as 1/2”, and you can cut it with a table saw.

– Try leveling sticks; these are pieces of wood with the end grooved to fit under the fridge.

You place them underneath the fridge and twist them slightly, causing them to tilt slightly in the right direction.

They have enough given that they won’t put too much pressure on your floor tiles.

– Your fridge is probably not level. But why worry when you have a cool drink to quench your thirst.

– When you remove the “bobble,” you notice the floor sloping down towards the fridge’s door. Just take off one block as far as you can and then put it back where it was.

Then put another block until your fridge is level again. Then, start putting the blocks back on the floor when you have the fridge level.

Can You Remove The Feet From A Fridge?

Yes. Removing the feet from a fridge is very simple. Just disconnect the four (or sometimes, two) rubber stabilizing feet on the back of your fridge and unscrew them from their positions on the base of your appliance.

You’ll need to measure the width depending on whether you have a floor-mounted air conditioner.

You will find the feet sold as sets of four pieces (two feet per piece), so you’ll have enough to cover your full width.

You can use a ruler and a pencil to measure the distance between your fridge and the wall behind it.

However, don’t cut any of the wood in that space because you will need to make space for the air conditioner when you’re done.

Next, measure down from the peak of your refrigerator about 3/4” and mark that. This is the peak of the wood that you’ll need.

Hold up the piece of two-by-four wood vertically and flat against your fridge. Rotate it until you find a point where it’s snug against all four feet on the bottom of the fridge, and then mark them with a pencil.

When you unlock your freezer, look inside. You should see several screws along both long edges of the entire interior perimeter of your fridge/freezer compartment.

Each screw has a color marking. They’re red and white, but they may be other colors or styles. Look upon your fridge or freezer, what the screws are, and identify them.

If you can’t find them but know there are , you can use a hacksaw to cut off one foot and use it instead.

Hopefully, your feet are colour-coded and labeled. If not, you can use a drill with a ¼-inch bit to make the holes for your screws as large as possible.

Don’t use a pilot bit. If you use one, the screw will go through your fridge and freezer and into your wall because the drill won’t allow it to expand enough to accept the screw head.

The next step is to go through the same process for your other side. You’ll have two screws in each refrigerator/freezer compartment when you’re done.

How Do You Lower The Wheels On A Kenmore Refrigerator?

Learn to do this yourself with some simple steps.

Step 1: Remove the hubcap from the wheel by twisting it counterclockwise until it pops off.

Step 2: Remove the screw holding in each wheel by unscrewing it counterclockwise with a Phillips head screwdriver and putting it in a safe place, such as your pocket or toolbox.

Step 3: Push down on the center of the wheel, near the axle, until it clicks.

Step 4: Lift on the wheel to put it back into its slot in the frame.

Step 5: Screw each wheel back into place. The wheels should lock into place, so you don’t need to use the hubcap as a leverage point.

You can do this on some models where the outside of the frame is removable, and then you would only have one more step.

You should take the time to do this to keep your refrigerator working properly and looking new.

Your Kenmore refrigerator is a great appliance  and you should took care of better than anyone else at the purchase time. Take some time, please, to make sure it’s working right.

Can You Lay A Frigidaire Refrigerator Down?

Yes. You can lay a Frigidaire refrigerator down, provided you don’t lay it on its back and don’t directly lay down the paneling.

Other than these things, you can lie a refrigerator down or even tip it over to get it in a room.

A Frigidaire is strong enough to handle tipping over, but if you want to make it easy on yourself, use some old towels on either side of the body of the refrigerator and then lay carefully.

The Frigidaire is very strong, durable plastic, so it will take little pressure to get it into place. If you have the option to lay it on its back, then do so.

Otherwise, lay on either side and be careful. The Frigidaire comprises very strong plastic, so it is not good to lay it down on its back if you don’t know what you’re doing.

If you are trying to get the unit into a tight space and do not have a lot of room to work, lay on either side and gently press down on the body of the refrigerator.

The refrigerator comprises durable plastic, so you will not have any problem getting it into a tight space.

If you have the option of laying the fridge down on its back, then it is time to do so. Lay some towels on either side to lay them down and don’t scratch or damage the unit.

The Frigidaire comprises tough plastic and can handle getting laid down with no problems. You should lay most refrigerators down after purchasing them for homes.

Do All Refrigerators Have Drip Trays?

Yes. They are easy to find and usually made of clear plastic, metal, or stainless steel.

The drip tray collects condensation from the coils and prevents them from dripping on the floor or other surfaces.

In most refrigerators, a water reservoir below the drip tray collects any condensation accumulated on the bottom of picnic coolers, ice cream buckets, or barbeque grills.

Many refrigerators have a drainpipe under the drip tray to channel excess condensation upward, allowing it to flow into the drain and not down the drain.

This pipe is easily accessible on most models and requires no removal tools.

Most of these materials are fairly inexpensive, are often available at restaurant supply stores, and can make an impressive feature of any kitchen or home bar while they last.

In older refrigerators, drip trays are chrome attached to the refrigerator’s bottom right side or center.

Newer models often comprise a molded plastic tray with a ridge on the underside to make it easier to detach and clean. They are so light that one can remove them without tools most time.

If you prefer a drip tray in the center, stainless steel grills provide an attractive look that lasts for years.

Why Is There Water In The Pan Under My Refrigerator?

The refrigerator is one of the most important appliances in the kitchen. It keeps your food cold, and it can hold any food.

This means you don’t have to worry about what you’ll eat tonight while deciding what groceries to buy today.

According to Energy Star’s guidance, these are inefficient for those who own refrigerators with water pans in the bottom. You should replace them with newer models that use less energy.

According to Energy Star, the water pans are inefficient because of the energy to keep the water frozen inside. Energy Star says this energy is less efficient than a newer model that doesn’t include a water pan.

You can identify if your refrigerator came with an inefficient water pan:

If your refrigerator does not have a water pan in it, and it uses an average of 20-30 minutes for its compressor to cool down, then it’s time for an upgrade.

If you’ve never replaced your refrigerator before, don’t worry.

You can order a new one through bluefox.com and have it shipped to you for free, or if you live in a large enough city, they can deliver it to your door.

Why Is The Back Of My Fridge Smelling?

Bacteria is usually the culprit behind those nasty smells coming from your fridge.

The best way to combat this bacterium is by cleaning your fridge regularly. You can do this with soapy water, paper towels, or vinegar and water solution.

Keeping your fridge clean will ensure that it stays fresh for years. The bacteria will not harm your food unless you let them grow.

To ensure that your fridge stays clean, start with a regular cleaning routine, like taking out the trash and wiping down the shelves with a sponge and dish soap once every two weeks.

This can help prevent this bacterium from growing in your fridge and ruining your food.

As time goes by, you have to do more and more to keep your fridge clean. You will inevitably climb into your fridge and find food that has grown mold.

This is where you will have to toss the food out.

The extra step of cleaning your refrigerator regularly will ensure that the bacteria don’t start growing there,

So it’s a good idea to clean it weekly and then twice a month, depending on how often you use the fridge.

If you notice your fridge is smelling, this could be a sign of mold. You can inspect your fridge and see if there are any brown or black spots on the shelves.

If there are, clean using a sponge and dish soap. To remove the odor completely, throw out any foods that have grown mold or look different from normal.

How To Stop Fridge From Rolling

Here are five simple solutions to fix your problem:

  1. Place a flat rubber object such as a cutting board on the floor in front and to the side of your fridge. The object prevents the fridge from rolling forward when you open it.
  2. Place a heavy stationary object, such as a stack of magazines or books, behind your fridge to stay in place when you open the door.
  3. Move your refrigerator away from any nearby heat source, such as an oven or furnace vent, that might cause it to roll away from you when opened.
  4. Install a refrigerator-specific anchor such as the Innotek CAP Mounting Kit or Innotek CLV Mounting Kit to secure it to the wall.
  5. Place a magnet in or on your refrigerator that holds it in place when you open the door.

What you should never do:

Avoid standing on top of your refrigerator when opening it.

Do not lift with your hands if the appliance does not move; this may cause damage to the sump seal and motor if removed from its seat location.

Conclusion

Fridge wheels are essential appliances that keep your food fresh but sometimes wear out over time.

If you use your refrigerator as the main appliance and not just as a place to keep your food cold, consider replacing the wheels yourself rather than hiring someone to do it for you.

Although it is more difficult than replacing the wheels on a stove or microwave, repairing your fridge wheel is something anyone can do with the right tools. And it is worth taking care of.

Tom

Hi! I' am Tom. I was a manager in one of the biggest stores for over 10 Years, am also an SEO by night. I don't like to call myself a blogger; they are very analytical, do email marketing, and know all SEO stuff. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts