Why Does My New Fan Smell Weird?

Why Does My New Fan Smell Weird?

Your new fan smells weird because it’s not sealed completely. The drive motor is not completely closed, and there is a bit of air coming in from somewhere. You can seal the hole with some tape or a zip tie or it could have been leaking from day one.

If your fan has been running for about 1-2 days, that should be enough time for the leak to evaporate. 

If your fan is still fresh, I suggest you send it back to where you bought it and get a replacement.

If they cannot, check the bottom of your fan and make sure it’s not damaged. If it’s damaged, then you may have found the problem.

Pedestal Fan Stopped Working(How To Fix)

A pedestal fan boasts a narrow body that stands on the floor. Pedestal fans are popular because they are affordable and circulate air well.

They work by spinning the blades of air upwards which then pushes the warm air from below up to cool you down.

Even though pedestal fans are easy to move, they have trouble getting into tight spaces and corners. Here is more information about pedestal fans.

Your pedestal fan has stopped working because it either ran out of power or has been turned off: Make sure that you plugged the fan into the wall and then turned it on by finding its switch or button .

OR

• Ensure the power to the outlet by looking for a light illuminated when you plug in your appliance.
• If the outlet is working, but your fan isn’t getting any electricity, try unplugging and re-plugging your appliance to wake it up.

If this doesn’t work, try flipping the switch or button again. If none of these fixes your problem, try replacing the fuse on your fan as a last resort.

Inspect the fuse on your pedestal fan by following these steps:

1. The fuse box for your pedestal fan will usually be located inside it. Open up its lid and look for a glass tube containing two wires.
2. The wires will be one of two colors: brown or black. The brown wires are the negative wire, and the black wires are the positive wire.
3. Next, carefully remove the fuse from its holder and switch.
4. Once you have removed the fuse, check if it is soldered onto several points of your fan’s power supply.

If your fan still doesn’t work after testing it with a new fuse, you will need to replace it. The larger fuse that you purchase should have a rating of 15 amps.

When you purchase your fuse, make sure that it is the same size as your current one. Once you’ve completed these steps, replace your fuse and test to see if this works.

If this does not fix the problem, you can try a couple more things. If your fan has a switch on it, press this to turn it off and on again.

If this doesn’t work, try plugging in and unplugging your appliance. Try to plug your fan into another outlet or even a power strip to see if this will fix the problem.

When it comes time to clean your pedestal fan, you can either do it yourself or have a technician do it.

Can Pedestal Fans Overheat?

Yes! Pedestal fans do overheat when they’re running at high speed. Since a pedestal fan is blowing hot air out, the blades will rotate more quickly to push the air out of the unit.

This can cause the pedestal fan to overheat and shut off if it’s running continuously on high power.

The best way to use a pedestal fan is by running it on low power. 

Most pedestal fans also have a thermostat that helps regulate the temperature. The thermostat will turn off the unit if it’s too hot.

This prevents damage to the motor or any other pedal fan components.

If you want your pedestal fan to cool you down and not overheat, run it on low power and make sure you position it away from direct sunlight and heat sources.

You can also try covering the grill or the front part of the pedestal fan to block off the hot air. This way, you can use your pedestal fan to keep cool while it’s running on low power.

It’s not recommended to run a pedestal fan at maximum speed all day long. This can cause problems with the motor.

Run the pedestal fan on low power for about 2-4 hours a day. 

Pedestal fans are ideal for keeping cool during hot summer days because they’re designed for this specific purpose. 

How Do I Fix My Pedestal Fan Not Oscillating?

Fixing your pedestal fan not oscillating can be a difficult task.

If you have an older pedestal fan, or it has been a while since you first replaced your pedestal fan, then the chances are that the belt may need to be replaced.

You will want to check for a small bolt on the bottom of your pedestal fan near the motor.

This is where the belt should attach to your fan, and this is also one of the few points when you would change out your old worn-out belt with a new one.

When you change out your belt, you want to make sure that you properly align the new belt.

If your pedestal fan was not oscillating before, then the chances are that the belt either broke or is just plain worn down from overuse or being left on for too long.

Here is a step-by-step on how to get your pedestal fan oscillating again.

Step 1: Remove The Old Belt

You first want to remove the old belt, which should have a small bolt located right where the motor is located.

You should be able to slip the old belt off easily, and then you will then want to move on to your next step.

Step 2: Attach the New Belt

You should first make sure that there is enough slack on your new belt.

If the belt is too tight or there is not enough slack, this will cause a problem when trying to get your pedestal fan oscillating again.

You want to attach the new belt directly in its place, and you should be able to unsnap the top part of it.

You then should be ready to attach the top part of the new belt back onto your pedestal fan.

You may want to make sure that you wear gloves because you never know what bacteria may be on your fan, even if it is old or has never been serviced before.

Step 3: The Oscillating Function

You can now turn on your pedestal fan, and it should now start oscillating again. You may want first to use a flashlight or have a friend to guide you.

You could also use the oscillation function on your TV or something similar. I prefer using a higher intensity setting on my TV remote to see and confirm that my fan is oscillating.

You will notice that the fan moves up and down instead of just circling in one direction when looking through the window.

Can You Leave A Pedestal Fan On All Night?

No! It’s not advisable to leave your pedestal fan on all night. If you have a pedestal fan, you know how amazing they can be for keeping your home cool in the summer.

They’re compact, quiet, and cost-effective. However, leaving your pedestal fan on all day or night is not recommended to maintain a cool and comfortable temperature in your house.

Some factors need to be considered when deciding whether or not it’s appropriate to leave the pedestal fan on overnight.

The first thing you need to consider is whether or not the pedestal fan has a timer. Many pedestal fans have a timer on them that allows you to set it for specific time intervals.

If your fan lacks a timer, then steps can be taken that will help keep the temperature down in your home overnight when using an ordinary pedestal fan.

If your pedestal fan does not have a timer, you will need to manually turn it on and off.

By turning the fan on an hour or so before you go to sleep and then off an hour or so after you wake up, you will be able to keep the temperature in your home down overnight.

This is because the fan will cool down the room while you are sleeping, and then it will continue cooling while you’re awake.

Another thing to consider is the number of people staying in your home. If you have one or two people staying at home, leaving the pedestal fan on overnight might not be a problem.

However, if you have a lot of people staying at home, then it would be best not to leave the pedestal fan on overnight.

You can say the same for children and pets who also use the room with your pedestal fan.

Lastly, you need to make sure that the pedestal fan is set up so it can properly cool your room.

If your pedestal fan does not have the proper placement for your room, then it will be best to find an alternate location for the fan.

You may need to use an extension cord to move the fan closer or farther away from where you are sitting or sleeping to get a proper cooling effect.

Can Pedestal Fans Catch Fire?

Yes! Pedestal fans can catch fire when the heating element malfunctions and starts a fire. This can happen when the fan has been turned on for a long time or if the cleaning has not been done periodically.

To prevent this from happening, it’s important to clean both the blade and the housing of your pedestal fan after each use.

Leaving dust, hair, or paper on the blades will increase your chances of a fire startup inside your pedestal fan.

The heating element on your pedestal fan is most often located in the back of the fan, where all the wiring is.

It is recommended that you do not touch this part of your fan and make sure that this area is cleaned at least once every six months.

This heating element can be hard to locate if it is not labeled. In this case, you could take off the back casing and look for a glowing red rather than a glowing orange or pink.

Being aware of the potential fire hazards in your house will keep you and your family from being burned or injured in a fire.

Pedestal, Velocity, Desk, and Tower Fans

Fans are a necessity of today’s society in personal and professional lives.

They provide cool air and relief from the heat, which is great in warmer climates but even better for homes without central heating.

However, fans can also be dangerous for kids: An oscillating fan can pose a danger for curious kids who are tempted to get close enough to stand on its arm or reach up high enough to turn it on.

When it comes to the pedestal fans, make sure that you don’t leave them on for your kids. Kids can play with the controls and could turn the fan to a high speed that could injure them.

Even if your children are playing in another room, make sure you turn off the fan before leaving, so it doesn’t start independently.

If you have a desk or workstation fan, do not leave it on when no one uses it.

You don’t want people to get electrocuted by the fan, and if you are working on something and the fan starts, you could injure yourself or others.

Make sure it is turned off before you leave your workstation, or make sure it can’t get turned on in the first place when you are working on something.

Fixing Your Electric Fan From Overheating?

Your fan smells like it’s burning because the bearings are contaminated with dust and dirt. You should clean the bearings regularly to avoid this problem.

A fan that smells like it’s burning is a sign that the fan’s bearings are contaminated by dust or dirt particles. 

Depending on your needs and personal preferences, it’s best to clean your fan’s bearing at least once every 6 months using something like compressed air or an old toothbrush.

Do not use water to clean your fan’s bearing because water and electricity do not go well together.

You should only use compressed air or an old toothbrush to clean the bearings, these objects don’t contain any water that can harm your fan. 

Things you will need:

• A can of compressed air or something similar
• An old toothbrush
• A small piece of cloth
• Sometimes (I suggest at least 15 minutes)

How to clean the bearings:

1. Unplug your fan and unplug the power cord from the wall outlet. Keep the power cord safe for later use.  Get rid of all screws on the bottom of your fan from its base to remove it from its casing. 
2. You will notice that your fan’s bearings are protected by a sleeve-like structure that allows you to take out the bearings and clean them. Remove the sleeve-like structure and take out the fan’s bearings.
3. Use your compressed air to blow all dust particles from inside your fan’s bearings, cleaning each side with a toothbrush or something similar in between blows with the compressed air. 

Reinstall the fan’s bearings and place them on the base. 

4. Plug your power cord back into the wall outlet and plug everything into its original position. Turn your fan on by using either of the two switches you can find at its back. 

Do not use water to clean your fan’s bearings because water and electricity do not go well together.

5. Once you finish cleaning, reinstall the sleeve-like structure over the fan’s bearings and screw it back to the base. 

You could try to clean your fan every six months if you feel like your fan needs it, but I would be happy if you won’t do that at all.

If you happen to be a DIY person and want to do this yourself, go ahead.

How Do You Get The Plastic Smell Out Of A Fan?

You can get the plastic smell from a fan by taking apart the fan, washing all the parts, and then drying it outside.

Polypropylene plastics are porous and can absorb smells from things around them. Follow these steps to alleviate your problem:

-Take apart the fan to access all of its pieces. Be sure to leave the motor unchanged, or you won’t be able to put it back together again.

-Wash each piece with soap and hot water or a gentle dishwasher detergent

-Let all the pieces dry outside, preferably on the eves of a house or building, so that rain doesn’t ruin them.

Even slight moisture could cause mold to grow inside the fan, which can be even more difficult and gross to clean up.

-Assemble the fan once all parts are completely dry and reattach it as you normally would.

-Leave the fan out for a day or so for all its parts to become fully relaxed and reacquainted.

I recently discovered that this is a very common problem, and I found many online forums that suggested the same solution.

It is pretty common in high-volume fan models because they make more noise than they should.

Pedestal Fans Common Problems And How To Fix

If you are in the process of buying a pedestal fan, you must know how to avoid common problems and how to fix them. 

A pedestal fan is one of the few appliances you need for cooling your home. It will keep your room cool, and it also uses less energy.

1. Fan Makes Noise When Operating

First, check the screws holding the blades up; they could be loose, causing vibration. If they are not tightened properly, it can cause a wobble and vibration sound.

If the screws are tightened, it could be a bearing problem. The next thing you want to do is take out the blades on the fan, look at the blade holders, and see if they are bent.

If they are bent, it will cause a vibration noise.

2. Switch or Light Fails to Turn On

You might have blown a fuse in your fan if this is happening. This can be easily checked by looking at your home’s circuit breaker or fuse box.

A simple way to check this is to turn your pedestal fan on and turn the light switch on. If the light has a short or is blown, you will see a spark, and it won’t work. Change the fuse or breaker as needed.

3. Fans Will Not Turn Off

First, put your fan on a timer. This will let your fan run for some time to wind itself down. This will also allow them to smooth out their bearings, giving the fan a better life span.

It’s also important to plug your fan into an outlet with power, so the fuse or breaker is not blown out.

4. Fans Vibrate or Shake

A loose screw or bolt usually causes this. Check the screws and bolts holding the fan blades and metal frame to see if they are tight. If they are loose, tighten them up.

It could also be a balancing issue, so you can balance your fan blades to make them stop shaking.

If you still have a problem, you will need to fix any blade holders or blade balances that might be off.

5. Fans Make a Grinding Noise

Problems with the bearings usually cause this. A bearing is an important part of the pedestal fan. It spins and keeps the fan running smoothly.

However, from time to time, it can wear down or break. This is why it’s important to change your fans every ten years.

If you want to save some money and this happens, you can replace your bearings. However, it’s a good idea to check how to do this yourself.

As you can see, most of the common problems with your pedestal fans have an easy solution.

You need to be able to recognize the problem and figure out what is causing the problem.

Try not to fix the issues yourself if you don’t feel that you are knowledgeable in fixing them yourself.

Most of the common problems are simple to take care of, and you should be able to repair them on your own.

So, if you need a ceiling fan for your home, I would recommend getting a pedestal fan. It’s smaller, uses less energy, and is easy to install.

They are also fairly cheap compared to most fans on the market. So if you are looking for a cheap way to cool your home, this summer pedestal fans will be perfect.

Conclusion

Pedestal fans make the best ways to cool your home during summer. They are cheaper than most fans, and they use less energy than air conditioners.

So, if you are looking for a fan this summer, make sure that you get a pedestal fan.